The AZTEK system was developed in Arizona based Ropes that Rescue Ltd rigging programs around the world. These, configured as "set-of-fours" (double blocks) will enable the rescue practitioner greater versatility in a personal mechanical advantage (PMA) for rescue and general rigging. The swivel Omni pulleys (blocks) are hewn from a solid block of high strength aluminum and are engineered with great pride to withstand over 8,000 lbs (36kN) of tensile force end to end. Sterling Rope Company has also designed sewn products for these pulleys including the 8mm restraint cord, rated at 4,270 lbs (19kN) and both ratchets in two colors, and shock absorber/restraint cords. The set of two blocks are different colors for ease of identification. Turn the set-of-fours one way and you have a 5:1 mechanical advantage. Turn it around and a 4:1 w/change of direction is the result, making this PMA extremely versatile. Also, the progress capture ratchet prusik can be attached at either end (orange to orange, or blue to blue). The progress capture prusiks are laced onto the restraint cord and then formed into a directional prusik hitch (3 on 2), which prevents the inadvertent loss of the prusic once assembled. One quick pin is sold with each set of blocks. Additional pins may be purchased if needed or if one wished to hold a spare in the opposite block.

NOTE: ASSEMBLY REQUIRED

Remember, simplicity and efficiency is the name of the game. Always, when possible, use gear that provides multiple uses. The AZTEK's double end exemplifies that theme. Out of one zipper of the side pouch, the rescuer is provided immediate edge protection and from a second zipper of the same pouch, the rescuer/rigger can deploy this mini MA (SOFs) in a multiude of rigging applications, including hauling systems, tensioned back-ties, tensioned guying for artifical high directionals, dynamic brake racks, and dynamic directionals (approximately 8 feet when using the full 50' of cord (15M).

General Technical Information (Note: official results may vary)

• Slippage on ratchet prusik at approx 17-18kN
  
• Slipped again @ 20kN and did not slip anymore
  
• System failed at 40.42kN
  
• 4" slippage of prusik
  
• The pulley failed at the "becket" where the 8mm sewn eye attaches and also broke the pin. Ratchet was fused to 8mm Edge Restraint cord. The MBS on the 6mm ratchet is 12.9kN so we were getting close to the ratchet limit. It was great to see the system go to 40kN.

• 1 ea. Rock Exotica Omni AZTEK Elite black pulley A
  
• 1 ea. Rock Exotica Omni AZTEK Elite black pulley B
  
• 1 Allen wrench
  
• 1 Quick Release Pin (Additional pins available for purchase here.)
  
• 1 Sterling 8mm AZTEK cord with sewn eye
  
• 2 Sterling AZTEK ratchets (Both black: Tagged A & B)
  
• 1 Sterling AZTEK travel restrict
  
• 1 RRG AZTEK Fanny, Bum Bag
• 1 Kong Tango Black

View Kit Features

  Back   Next

The AZTEK Tactical Elite Pulley System Kits for Rope Access & Fall Protection, RRGKAZ-TAC-ELITE, are a Rescue Response Gear Red iBex approved product to fill your various tactical and industrial rope access rescue fall protection needs for a kit for load hauling, rope climbing and descending, mast and tower climbing in rope access, telecoms, stage rigging and rescue gear and equipment for professionals in work at height, positioning, suspension and fall arrest. Can be combined with carabiners; rescue and access rope, cord and webbing; pulleys and anchors; belay and rappel devices; ascenders, lanyards and shock absorbers; personal protective equipment and other approved hardware.