Petzl Ascension - Right $64.95 B17-R Used for climbing rope, self-belaying on fixed ropes, or as a handle when it is necessary to pull on the rope with a good grip. This ascender is large enough to accept bulky winter gloves in the oversized handles.

Petzl Ascension Left $64.95 B17L Used for climbing rope, self-belaying on fixed ropes, or as a handle when it is necessary to pull on the rope with a good grip. This ascender is large enough to accept bulky winter gloves in the oversized handles.

Petzl GriGri $89.95 D14 The GRIGRI is a self-locking belay device which also functions well as an ascender or descender when needed. Once properly installed, the device locks onto the rope when weighted with a rotating stainless steel cam. Unlocking is accomplished by unweighting the GRIGRI, or by pulling the self-retracting handle, which unlocks the cam. Additionally, a simple self-locking Z-rig can be made with the GRIGRI functioning as the first pulley in the system. For 10-11 mm ropes

Petzl I'D LG $210.00 D20LG The I'D is primarily a particularly efficient and user-friendly descender. To descend simply pull on the handle while keeping hold of the rope, controlling the running of the rope by varying the grip on the free end. As soon as the handle is released, it locks. The large version is NFPA G rated to 1983-2006. Specs: - Rope diameter: 11.5-13 mm - Weight: 530 g - Construction: Anodized aluminum and stainless steel. Handle is made from nylon reinforced with glass fibers. - Individually tested. - Standards: CE EN 341 class A, NFPA G

Petzl Microcender Rope Grab $55.95 B54 A smaller version with the exact same features as the Rescucender. The user connects directly to the grooved cam, which can slip if overloaded and thus act as a load limiter. The device will slide up the rope unaided, while a simple action will allow it to be moved down the rope. It is attached to the rope by two consecutive actions. This operation is slow but offers greater safety. Individually tested. Accommodates ropes size 9-13 mm. Standards: CE prEN 567, UIAA

Petzl Rescuecender Rope Grab $59.95 B50 A rope grab designed to minimize damage to the rope under shock loading. The jaw has a set of shallow, slightly rounded teeth-more like grooves. They create just enough friction against the rope and minimize damage in shock loading. Accommodates ropes size 11mm or 12.5 mm. Made in USA.

Petzl Shunt $59.95 B03 Use this safety tool in conjunction with your descender as an automatic safety lock-off device on the tails of your rope. May be used to re-ascend ropes. Use with a doubled rope or two ropes of equal diameter. Strength: Slippage on two ropes: 9mm = 5kN, 10mm = 7kN, 11mm = 7.5kN wt: 190 gm 6.7 oz

Petzl Basic $49.95 B18 The Petzl Basic is a versatile rope grab used as an anti-slip device in a hauling system, rope climb or self belaying on a fixed rope. For use with single rope from 8 to 13mm. CE EN 567.

Petzl Croll $56.95 B16 Thanks to the twisted position of the attachement hole, the Croll is always held flat against the stomach. The upper rectangular hole allows the attachment of shoulder straps for support. The Croll is fitted with an ergonomically shaped opening clip which is easily gripped between the thumb and index finger.

Sterling Bound Purcell Set w/Bag $32.50 S1206000SETB Sterling Rope Bound Loop Purcells; the essential equipment for anyone working in the verticle relm. Stitched terminations mean no more messy knots to deal with... clean and easy. Comes with the perfect bag to store the gear. 6mm cord, 2910 lbs MBS, 3395 lbs average BS Chest length 22" end to end Short length 43" end to end Long length 68" end to end

Petzl Pantin $69.95 B02 A foot mounted rope clamp the Petzl Pantin makes rope climbing much easier (when used with the Petzl Croll and Petzl Ascension or Kong Double Ascender)and replaces the "foot lock" technique. for use with single ropes from 8 to 13mm in diameter.