 Take
us…
 with
you…
Scan
code with a mobile device. |
|
|
|
|
Petzl Sequoia Arborist Saddle
$395.00
C690F0
Seat harness for arborists using traditional footlock ascent techniques
- Extra-wide, semi-rigid waistbelt offers exceptional support and ventilation
- Waistbelt and suspension seat lined with breathable perforated foam for maximum comfort when suspended
- Easy to don with FAST buckles on the waistbelt and leg loops
- Attachment bridge provides lateral mobility
- Attachment bridge is attached to the waistbelt and to the leg loops by two gated rings in order to:
- distribute the pressure evenly between the waistbelt and leg loops (three positions)
- adapt the length of the attachment bridge
- attach the RING S or the SWIVEL directly to the attachment bridge
- The two lateral attachment points transfer the weight evenly around the waistbelt for comfort when leaning back in the belt (when feet are supported)
- Five equipment loops with protective sheaths
- Two rings for attaching a hand saw
- Slots for CARITOOL tool holder
Specifications:
Attachment point(s): ventral, lateral
Certification(s):
CE EN 358, CE EN 813
Made in: France
Reference: C690F0 1 (Small-Large)
Size: 1
Weight: 1320 g (2.91 lbs)
Waist belt: 70 - 100 cm
Leg loop: 50 - 65 cm
Reference: C690F0 2 (Large-XLarge)
Size: 2
Weight: 1370 g (3.02 lbs)
Waist belt: 85 - 120 cm
Leg loop: 60 - 75 cm
This Petzl Sequoia Arborist Saddle is a Rescue Response Gear Red iBex approved Petzl product to fill your various needs for use in rope rescue and industrial rope access fall protection when using equipment such as webbing, rope, anchors, harnesses, helmets, gloves, belay & rappel devices, ascenders, pulleys, carabiners and other approved hardware in professional swiftwater, firefighter, canyoneering, work at height, positioning, suspension and fall arrest when climbing and descending, mast and tower climb, telecoms, wind turbines and stage rigging .
(see all petzl products
here)
|
|
|
