|
|
|
|
 |
 |
 Take us…
 with you…
Scan code with a mobile device.
|
|
Take us…
with you…
Scan code with a mobile device.
|
|
|
|
 
|
|
SMC Swiftwater Pulley
$40.70
SM147000
Noting the unique requirements found in Swift Water Rescue, SMC created an entirely new pulley to address those needs. The Swiftwater fits between SMC's Micro PMP and 3 inch PMPs in both size and work load, and represents a reasonably priced, non-NFPA alternative to other mid-sized pulleys.
Made using high quality aluminum, this lightweight pulley weighs 6 oz. and features a 2'' sheave. Anodized side plates feature a series of holes that help to minimize the hydroplaning effect that might occur with a typical pulley. These side plates are also configured to allow to work as a Prusik Minding Pulley and are precisely tensioned and for easy one-handed operation and secure placement at any point along the rope.
High quality, sealed ball bearings help to provide the optimal efficiency that is so crucial in rope rescue systems. They help to reduce the performance-robbing resistance that is inherent in most multiple component systems and are not prone to failure under misaligned loads or with twisted gear that may occur with needle bearings.
The wide and flat base maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley. The top hole accepts 2 large rescue carabiners or multiple small carabiners and allows the carabiners to be rotated freely and completely even while closed.
Product Specifications:
- Type: Single
- Axle: Ball Bearing
- Material: High Quality Aluminum
- Dimensions: 4 in. by 3 in. by 1-1/4 in.
- Weight: 6 oz. (170g)
- Max. Rope size: 1/2 in. (13mm)
- Sheave: 2 in. Aluminum
- 3 Sigma MBS: 7,644 lbf (34kN)
Features and Benefits:
- Anodized side plates feature a series of holes that help minimize the hydroplaning effect that might otherwise occur with other pulleys.
- Side plates are precisely tensioned and for easy one-handed operation and secure placement at any point along the rope.
- Uses sealed ball bearings which provide optimal efficiency, thus reducing the performance-robbing resistance that is inherent in most multiple component systems and are not prone to failure under misaligned loads or with twisted gear as may occur when using pulleys made with needle bearings.
- Wide base and side plate design works well to mind Prusik cords of up to 8mm.
Zoom In = Single Click Image
Zoom Out = Double Click Image
This item is a Rescue Response Gear Red iBex approved product to fill your various needs for use in rope rescue and industrial rope access fall protection when using equipment such as webbing, rope, anchors, harnesses, helmets, gloves, belay & rappel devices, ascenders, pulleys, carabiners and other approved hardware in professional swiftwater, firefighter, canyoneering, work at height, positioning, suspension and fall arrest when climbing and descending, mast and tower climb, telecoms, wind turbines and stage rigging .
|
|
|
|
|
|
|
Pulleys and rope pulley systems for rescue, swiftwater, mountain climbing, arborists, fire fighters, rock and tree climbers, industrial rope access professionals. Swivel pullys and complex high strength pulley systems and kits, Variations can include ratcheting, micro block, velocity, trolley, single, double, tandem locking, knot passing, rope grab and clamp, prusik application features. For application such as rigging, belaying, rappelling, rescue victim stretcher raising, lifting and lowering.
|
|
|
