A go-to for heavy-load jobs where handling and gear compatibility are of key importance. With a minimum break strength of nearly 13,000 lb and a tight sheath, the 5/8″ is strong and durable enough to handle all your toughest rigging jobs.
EscapeTech is a 7.5mm escape rope that has a Technora sheath and nylon core construction. Hook options Crosby hook, Lighting GT, or Lighting Hook.
6.0 mm Cord
The 6 mm TRC is a high strength specialty cord that features a Technora sheath and nylon core. Designed for high strength and low-elongation applications such as personal escape, rappels, or haul systems.
Available Lengths: 65′, 165’, 330’ | 20, 50, 100 m
HTP (hyper-tenacity polyester) is a multi-use rescue/rappel rope that resists moisture and has high abrasion resistance.
11.0 mm Static Rope
Maximum strength with low stretch. A multiuse rescue and rappel rope perfect for rope rescue, rope access and efficient ascending/descending. Low-stretch properties and high-moisture resistance allow the 7/16″ to operate consistently in wet and dry conditions. Also available in our BiColor pattern, which provides an added safety measure for arbor climbing SRS systems.
Available Lengths: 150′, 165′, 200′, 300′, 600′, 660′ | 46, 50, 61, 92, 183, 200 m
NFPA 1983: Technical
The Bearer Tie-In, also known as, Foot-End Spider is used in sets of 2 and they attach from the foot-end of the litter to the foot-end set-of-fours or haul point. These cords are set-up as prucells to allow for adjustment on steep angle evacuations. 7mm x 34″ sewn in a bound loop.
Helping to take the hassle out of tying knots, the Sterling Sewn Cord is manufactured using high strength abrasion resistant cord. These prusiks were designed to meet the needs of arbor professionals worldwide.
Short is 16″ in length – Red
Long is 22″ in Length – Blue